Hatching Time Cimuka CT Series - APC cIS Mode Technical Details

CT Series /
APC (clS Mode) Technical Analysis
System repeats APC every cooling cycle time (cPr). In a power outage, (cPr) will continue from
the last recorded time. Example: If there is a 1 hour power cut, the next cooling time will delay
about 1 hour. Remaining time to next cooling can be checked by the controller (See Page 12).
“Cooling for a set (clS)” mode parameters
APC Parameter
Symbol
Set Value
Cooling mode
clF
clS
Cooling start time
cb
on
Cooling cycle
cPr
24 h
Cooling set point °C (set - adjusted data)
cSt
-8.0 C
Cooling set point °F (set - adjusted data)
FSt
-15 F
Waiting time in cooling set point
cth
20 min
Max cooling time
hct
120 min
Humidification*
chu
on
Humidification Time*
cht
10 min
Max humidity during humidification*
chh
80 RH%
Cooling fan activation**
cFn
on
Page 19 of 23