Room Sensor
Your CT model is equipped with a room
sensor installed through USB connection.
Room sensor measures the temperature
and humidity conditions of the room. The
room sensor is identical to the main
sensor inside the egg incubator. It can be
used as a spare sensor in emergency
situations. The incubator is complete
with alarms to help you monitor high/low
temperature and humidity.
USB connection can also be used for
calibration sensors. Connection device
should be selected from the user menu
on the display. Additional USB
accessories for your incubator coming
soon!
Caution! Always power off the incubator
during any sensor installation.
Safety
Power
● 110V / 60Hz - Plug directly into the wall without using extension cords
To Next Page
Loading...