Ventilation
Carbon dioxide is produced during incubation and needs
to be removed through proper ventilation. Good
ventilation in your incubation room will enrich your eggs
with oxygen rich air and remove excess carbon dioxide.
In CT series models, ventilation within the unit is
adjustable through exhaust and intake fans. Twist intake
and exhaust holes to increase or decrease air flow within
the incubator. Keep at least 2 ft away from any walls.
Caution! Make sure room is well ventilated
Caution! Keep vent holes at least ⅓ open at all times
Caution! Keep vent holes fully open during hatching period
Caution! Never breed birds in incubation room due to carbon dioxide release
Incubator Setup
Out of the Box Setup Guide
Step 1) Attach Humisonic Reservoir
1. Place Humisonic
TM
reservoir into hole
2. Place stainless steel Humisonic
TM
unit into the bottom of the reservoir
3. Connect Water Tank - 1 Gallon and Humisonic
TM
reservoir with Flexible hose
4. Connect Humisonic
TM
cable to Humisonic
TM
Adapter.
5. Connect adapter to the control panel.
Caution! Do not use hard or lime-enriched water & change humidifier disks regularly.
Caution! We do not advise leaving the unit on for prolonged periods of time.
Caution! Never attempt to close the air-in hole on the Humisonic
TM
reservoir cover.
To Next Page
Loading...
Need help?
General
