Hatco Toast-Qwik TQ-405 User Manual

14
Form No. TQ2M-1219
English
OPERATION
Power Save Mode with Indicator Light
All TQ-400, -800, -1200, and -1800 series toasters have a
built-in Power Save Mode with Indicator light feature. This
feature reduces power to the heating elements by 50 percent.
During Power Save Mode the indicator light on the Power Save
( ) button will flash.
To activate Power Save Mode:
1. Press the button until the indicator light flashes.
To exit Power Save Mode:
1. Press the button or turn any knob until the indicator light
stops flashing.
NOTE: Allow a minimum of 2–3 minutes before toasting. Unit is
back up to full power within 10 minutes.
Adjusting the Toast Feed Ramp
The toast feed ramp is installed at the factory and can be used
in two positions.
Automatic Feed Position
For automatic feed, the toast feed ramp should be in an upright
position. Bread products enter the toaster by placing them on
the feed ramp and releasing.
Manual Feed Position
For manual feed, the toast feed ramp should be in a horizontal
position on top of the toaster. Bread products are manually
loaded by placing directly on the conveyor belt.
Automatic Feed
Position
Manual Feed
Position
Toast Feed Ramp

Hatco Toast-Qwik TQ-405 Specifications

General

Brand	Hatco
Model	Toast-Qwik TQ-405
Category	Toaster
Language	English