HATO 200C - Main Features

4
During the installation and the use of the automation, pay attention to the following safety
rules:
 Distance security!
 Mechanisms moving!
 Do not install automation in an environment saturated with explosive mixtures!
 Electric Shock!
 Use gloves!
 Use welding glasses!
 Maintain ear protection!
Failure to comply with the instructions above may result in personal injury or property damage.
Our company does not accept responsibility for damage or injury resulting from installing this
operator.
2. Main features
 The door operator is designed for garage door.
 The control unit regulates all the necessary functions such as automatic lighting control,
automatic memory, automatic close, automatic reverse and photocell protection etc.,
extremely quiet and smooth operation.
 Courtesy light will turns on in using and turns off after 3 minutes.
 The operator memorizes the limit positions and unique braking system that slows the unit
down at the end of its travel. Soft start and soft stop control guarantees extremely smooth
and quiet operation.
 Automatic reversion on obstruction during closing procedure.
 The controller has a security LOCK function which prevents operation of the door from
transmitter.
 In the event of power failure, the release device makes it possible to open and close the
door manually.
 Hopping code remote control with max. 20 pcs hand transmitters.
 Wiring terminals for battery, button switch, infrared photocell etc.