EasyManua.ls Logo

Hatz 2-4L41C - Maintenance Every 250 Hours of Operation

Hatz 2-4L41C
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.3. Maintenance every 250 hours
of operation
5.3.1. Engine oil change
(see Chapter 5.1.)
The dipstick mark will indicate whether or not
the engine has a sump (see Chapter 4.1.1.).
The engine must be stopped, and should be
standing on a flat, level surface.
– Drain the engine oil only when it is warm.
Risk of scalding from hot oil.
Trap the old oil and dispose of it in an
environmentally acceptable manner.
34
– Unscrew oil drain plugs „1“ and allow all the
oil to drain out.
– Attach a new seal and insert and tighten the oil
drain plug.
L3/48
1
35
Important !
When unscrewing and removing drain plug „1“,
make sure that drain tube „2“ is not accidentally
loosened. If necessary, prevent it from turning
with a suitable open-ended wrench.
2
1
L3/28
26

Other manuals for Hatz 2-4L41C

Related product manuals