36
– Add lubricating oil of suitable quality and vis-
cosity up to the MAX. mark on the dipstick.
(Chapter 4.1.1.).
– Run the engine for a short period, then check
the oil level again and top up if necessary.
5.3.2. Cleaning cooling fan, cooling fins
and oil cooler
Before cleaning, the engine must be
stopped and allowed to cool down.
– On encapsulated engines, unscrew and remove
the hood, side panel with speed control lever,
cover plate on operating side and air outlet
duct and cover plate on air outlet side (see
Chapter 2).
– On non-encapsulated engines, take off the side
trim and the air duct to the engine oil cooler.
37
– Unscrew and remove baffle plate „1“.
To Next Page
Loading...
