Need help?Do you have a question about the Hayear HY-6110 and is the answer not in the manual?
Explains the operations of the ON/OFF, MENU, OK, UP, DOWN, and M/ buttons on the camera.
Details the functions of buttons on the remote control for camera operation.
Covers preparatory steps, boot sequence, and basic photo mode operations.
Instructions for starting, stopping, and previewing video recording.
Guide to selecting the user interface language from available options.
Instructions for setting up grid lines, including cross hair, line, direction, position, color, and weight.
Instructions for setting the image aspect ratio (16:9, 16:10, 4:3).
How to enable horizontal or vertical mirroring for image comparison.
Guide to using the same screen comparison feature.
How to freeze left, right, or the whole screen for comparison.
How to use the one-click exposure function to adjust brightness.
Instructions for setting image quality to Fine, Normal, or Economy.
How to adjust image sharpness to Strong, Normal, or Soft.
How to enable or disable the High Dynamic Range (HDR) feature.
Guide to setting the ISO sensitivity (Auto, 100, 200, 400).
How to set white balance (Auto, Tungsten, Daylight, Fluorescent, Cloudy, Manual).
Instructions for selecting color modes (Normal, Black & White, Sepia, Inverse Color).
How to adjust exposure compensation values.
Guide to setting exposure time (Auto, 1/30s to 1/86s).
Steps to set the current date and time on the device.
Instructions for setting the power frequency (50Hz or 60Hz) to prevent image flickering.
Steps to format the TF card and a warning about data loss.
How to reset the camera to its default system settings.
How to set the duration for loop recording (Off, 1, 3, 5, 10 minutes).
Instructions to turn the date stamp feature on or off.
Step-by-step guide on using ON/OFF button to freeze left, right, or whole screen.
Introduces the HAYEAR measurement software and its key features.
Explains the main menu, toolbar, sidebar, and status bar of the software.
Details how to snap photos, record videos, and browse files using the software.
How to configure camera settings like resolution, format, exposure, and white balance.
Options for flipping images, dark field correction, and restoring default parameters.
Explains the function of measurement icons like Track, Point, Line, and Object select.
Describes tools for measuring rectangles, polygons, circles, rings, text, and angles.
How to export measurement data to a CSV file for analysis.
How to enter actual data into the calibrate window for accurate measurements.
Adjusting units and magnification after calibration for measurement.
Addresses common issues like blank or black preview images and suggests driver updates.
General| Frame rate | 30 fps |
|---|---|
| White balance | Auto |
| Sensor Type | CMOS |
| Video Resolution | 1920 x 1080 |
| Focus Type | Manual |
| Resolution | 1080P |
| Operating temperature | 0°C to 50°C |
| Interface | USB |
| Effective Pixels | 2.0 MP |
| Lens Type | Fixed |
To Next Page
