Hayter LT324 - Weight and Dimensions; Recommended Lubricants and Hydraulic Fluids

924916KG251004
SPECIFICATIONS
Wheel Base:
Working Width:
Cutting Width:
Transport Width:
Overall Length:
Overall Height:
Approx. Working Weight:
WEIGHT AND DIMENSIONS
RECOMMENDED LUBRICANTS AND HYDRAULIC FLUIDS
Grease Points: A good quality medium grease.
Engine: Refer - ENGINE OPERATORS MANUAL.
Hydraulic System:
Should you be in any doubt please contact your Hayter dealer. Using incorrect grades will cause
premature wear of hydraulic components and invalidate warranty.
1440 mm.
2300 mm.
2120 mm.
1575 mm at 13mm height of cut.
2690 mm.
1520 mm.
1250 kg less operator, no options fitted.
(The exact weight depends on the cutterhead configuration).
Ambient Temperature Range
0 - 30 C (32 - 86 F)
I S O viscosity grade
46 hydraulic oil.
O
O
15 - 40 C (59 - 104 F)
I S O viscosity grade
68 hydraulic oil.
O
O
1.23
1.23