Need help?Do you have a question about the Hayter LT322 and is the answer not in the manual?
General| Brand | Hayter |
|---|---|
| Model | LT322 |
| Category | Lawn Mower |
| Language | English |
Provides guidance for assembly and operation of the cab and safety protection.
Outlines the warranty terms and conditions for the cab.
Emphasizes careful instruction and familiarization with equipment for safe operation.
Stresses the importance of using proper lifting equipment and seeking assistance for heavy loads.
Details slope operation limits and safe practices to prevent overturning on inclines.
Covers essential maintenance checks like torqued fasteners, part replacement, and emergency exits.
Provides information on operator's daily personal noise exposure and sound pressure levels.
Declares conformity with relevant EU directives and safety requirements.
Outlines requirements for assembling the cab to the LT322 and LT324 models.
Details the initial steps for fitting the cab to the machine, including safety precautions.
Continues assembly steps, focusing on chassis and support bracket installation.
Covers wiring harness routing, connection of switches, fuse installation, and securement.
Details fitting the draught excluder, protection strip, rear cab mount, and edging strip.
Explains lifting and aligning the cab frame assembly with the machine and pivot blocks.
Guides on fitting lower trims, securing the cab to rear mounts, and final tightening of fasteners.
Addresses modifications for early models, including filing slots and drilling holes for cab fitting.
Details the process of removing the old beacon and preparing the cab roof for installation.
Provides a template with dimensions for drilling holes for beacon mounting on the cab roof.
Outlines initial checks and operations after cab installation, including fluid fill and lubrication.
Lists daily checks for security, seat belts, emergency exits, and washer fluid levels.
Specifies lubrication points for hinge points and door locks as part of routine maintenance.
Provides step-by-step instructions for safely hinging the cab for mower maintenance access.
Details the procedure for safely re-assembling the cab after maintenance, including alignment and torque.
To Next Page