EasyManua.ls Logo

Hayter LT322 - EC Conformity Information; Noise Level Assessment; EC Declaration of Incorporation Details

Hayter LT322
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operator’s Daily Personal Noise Exposure : HAYTER LIMITED have no control over site
conditions, duration of use, state of maintenance or adjustment of the mower. All of these
factors will affect the operator’s daily personal noise exposure level - L
EP,d
Under typical working conditions operators could be exposed to a daily personal noise exposure
level in excess of 85 dB (A) L
EP,d
Sound Pressure Level:
The maximum sound pressure level at the operators position is 87 dB(A) under typical working
conditions.
If ear protection is required, ear protectors with good attenuation in the 63-8000Hz frequency
range should be used.
Employers of personnel using this machine are advised to read the ‘Noise at Work Regulations’
as the operators daily personal exposure level could be above the ‘First Action Level’.
1.8 1.8
EC DECLARATION OF
INCORPORATION
Company Name Hayter Limited,
Company Address Spellbrook,
Bishop’s Stortford,
Herts.
CM23 4BU
England.
Machine Code No. 917P / 919R
Models LT322 / LT324 Cab Incorporating a Roll Over Protective
Structure and Fitting Kit.
This equipment complies with Directive 89/392/EEC amended by 91/368/EEC, 93/44/EEC and
93/68/EEC.
Essential Health and Safety requirements relating to the design and construction of machinery and
safety components.
Tested to OECD code 4 ISO 3776
The above cab must not be put into service unless the machine to which it is to be fitted has been
declared in conformity with the provisions of Directive 89/392/EEC amended by
91/368/EEC,93/44/EEC and 93/68/EEC Essential Health and Safety requirements relating to the
design and construction of machinery and safety components.
Signed : Date : 21.07.97.
M.A. Wright
(Technical Director)
EC CONFORMITY INFORMATION
EC DECLARATION OF INCORPORATION
NOISE LEVELS
IS015

Related product manuals