Hayward Aqua Solar User Manual

Temperature/Resistance /Voltage
All Hayward controls use a 10K thermistor sensors. When disconnected from the
control, the sensor will read 10K ohms at 25ºC/77ºF. Refer to the chart below for
the resistance at other temperatures. For a given temperature, the resistance
reading should be accurate to ±1%. For a given resistance reading, the tempera-
ture reading should be accurate to ±0.5ºF. All voltage measurements (DC) must
be made with the sensor connected to the control and should be accurate to ± 2%.
°F Ohms
V
olts °F Ohms
V
olts °F Ohms
V
olts °F Ohms
V
olts
1 82,719 4.46 41 25,391 3.59 81 9,076 2.38 121 3,679 1.34
2 80,142 4.45 42 24,704 3.56 82 8,861 2.35 122 3,602 1.32
3 77,656 4.43 43 24,037 3.53 83 8,651 2.32 123 3,527 1.30
4 75,255 4.41 44 23,391 3.50 84 8,447 2.29 124 3,454 1.28
5 72,937 4.40 45 22,764 3.47 85 8,249 2.26 125 3,382 1.26
6 70,698 4.38 46 22,156 3.45 86 8,056 2.23 126 3,312 1.24
7 68,535 4.36 47 21,566 3.42 87 7,867 2.20 127 3,244 1.22
8 66,447 4.35 48 20,993 3.39 88 7,684 2.17 128 3,177 1.21
9 64,428 4.33 49 20,438 3.36 89 7,506 2.14 129 3,112 1.19
10 62,479 4.31 50 19,900 3.33 90 7,333 2.12 130 3,049 1.17
11 60,595 4.29 51 19,377 3.30 91 7,164 2.09 131 2,987 1.15
12 58,774 4.27 52 18,870 3.27 92 6,999 2.06 132 2,926 1.13
13 57,014 4.25 53 18,377 3.24 93 6,839 2.03 133 2,867 1.11
14 55,313 4.23 54 17,899 3.21 94 6,683 2.00 134 2,809 1.10
15 53,669 4.21 55 17,435 3.18 95 6,530 1.98 135 2,752 1.08
16 52,078 4.19 56 16,985 3.15 96 6,382 1.95 136 2,697 1.06
17 50,541 4.17 57 16,548 3.12 97 6,238 1.92 137 2,643 1.05
18 49,054 4.15 58 16,123 3.09 98 6,097 1.89 138 2,591 1.03
19 47,616 4.13 59 15,711 3.06 99 5,960 1.87 139 2,539 1.01
20 46,225 4.11 60 15,310 3.02 100 5,827 1.84 140 2,489 1.00
21 44,879 4.09 61 14,921 2.99 101 5,697 1.81 141 2,440 0.98
22 43,577 4.07 62 14,543 2.96 102 5,570 1.79 142 2,392 0.97
23 42,318 4.04 63 14,176 2.93 103 5,446 1.76 143 2,345 0.95
24 41,099 4.02 64 13,820 2.90 104 5,326 1.74 144 2,299 0.93
25 39,919 4.00 65 13,473 2.87 105 5,208 1.71 145 2,254 0.92
26 38,777 3.97 66 13,136 2.84 106 5,094 1.69 146 2,210 0.90
27 37,671 3.95 67 12,809 2.81 107 4,982 1.66 147 2,167 0.89
28 36,601 3.93 68 12,491 2.78 108 4,873 1.64 148 2,125 0.88
29 35,565 3.90 69 12,182 2.75 109 4,767 1.61 149 2,084 0.86
30 34,561 3.88 70 11,882 2.72 110 4,664 1.59 150 2,044 0.85
31 33,590 3.85 71 11,589 2.68 111 4,563 1.57 151 2,005 0.84
32 32,648 3.83 72 11,305 2.65 112 4,464 1.54 152 1,966 0.82
33 31,737 3.80 73 11,029 2.62 113 4,368 1.52 153 1,929 0.81
34 30,853 3.78 74 10,761 2.59 114 4,274 1.50 154 1,892 0.80
35 29,998 3.75 75 10,500 2.56 115 4,183 1.47 155 1,856 0.78
36 29,169 3.72 76 10,246 2.53 116 4,094 1.45 156 1,821 0.77
37 28,365 3.70 77 9,999 2.50 117 4,007 1.43 157 1,787 0.76
38 27,587 3.67 78 9,758 2.47 118 3,922 1.41 158 1,753 0.75
39 26,832 3.64 79 9,525 2.44 119 3,839 1.39 159 1,720 0.73
40 26,100 3.61 80 9,297 2.41 120 3,758 1.37 160 1,688 0.72
Electronic Solar Control Center
Operation and Installation
Manual
AQ-SOL-LV
AQ-SOL-LV-TC
AQ-SOL-LV-SP
092008F RevG
Copyright © 2010 Hayward Inc.
www.haywardnet.com
620 Division St.
Elizabeth, NJ 07207
Aqua Solar

Hayward Aqua Solar Specifications

General

Brand	Hayward
Model	Aqua Solar
Category	Controller
Language	English

Summary

System Specifications

Power Requirements

Sensor Details

Details the types and number of sensors required for system operation and monitoring.

Control Logic Parameters

Troubleshooting Common Issues

Power LED Off Diagnosis

Steps to diagnose issues when the power indicator LED is not lit.

Pool Sensor Error Resolution

Describes troubleshooting steps for pool sensor open or short circuit errors.

Jumper Settings and Configuration

Enabling Cooling Function

Recirculate Freeze Protection Setup

Details enabling freeze protection, sensor placement, and limitations.

Solar Override Functionality

Describes enabling solar override for filter pump operation during solar availability.

System Operation Guide

Control Switch and Display Usage

Setting Desired Pool Temperature

How to set and view the desired pool temperature using the control knob.

Timeclock Operation (AQ-SOL-LV-TC)

Installation Procedures

Power Input Wiring

Solar Diverter Valve Wiring

Sensor and Wiring Connections

Solar and Pool Sensor Mounting

High Voltage Relay Wiring