Hayward E-Command 4 User Manual

1
System Overview
The ECOMMAND 4 is a multifunction pool controller used to fully manage your pool/spa system. The
ECOMMAND 4 can control pumps, valves, lighting, heaters, and chlorination. Although the ECOMMAND
4 is easy to use, it is important to completely read through this operating manual before attempting to
operate the control.
NOTE: This manual assumes that the ECOMMAND 4 has been wired and configured according to the
Installation Manual. Aspects of the ECOMMAND 4 that pertain to system setup are not covered in this
manual.
Automation
The ECOMMAND 4 can control up to 4 high voltage (120/240V) pieces of equipment, up to 3 automatic
valve actuators, and a conventional and solar heater. Both manual and automatic (programmed) operation
are available. All of the control functions are programmed at the unit’s display/keypad. Although the
ECOMMAND 4 has no built-in chlorinator feature, it can control an external Goldline Aqua Rite or
Hayward Swimpure chlorinator.
26
Water
Air
Solar
240 VAC
Power
Filter Pump
Lights
Aux 1
Aux 2
Pool/Spa Suction &
Return Valves
Valve 3
Heater
Circuit Breaker
Subpanel
Main Display
Keypad
Optional
Wireless Base
Receiver
Optional
External Chlorinator
(requires Aqua Rite)
Temperature
Sensors
120/240V
Relays
24V Valve
Actuators
Optional Wireless
Spaside Remote
LDL INE
CONTROLS INC.
G
POOL SPA
ON OFF
ON OFF
ON OFF
ON OFF
ON OFF
VALVES
FILTER
HEATER
LIGHTS
AUX1
AUX2

Hayward E-Command 4 Specifications

General

Brand	Hayward
Model	E-Command 4
Category	Controller
Language	English