Need help?Do you have a question about the Hayward HCB110BTA and is the answer not in the manual?
General safety warnings and precautions for servicing heat pumps.
Indicates a low pressure switch opening, often due to refrigerant loss.
Indicates a high pressure switch opening, often due to restricted water flow.
Errors related to water temperature sensors (PO/OP, Pc/SH) and troubleshooting.
Errors related to defrost sensors (dPO/cOP, dPc/cSH) and troubleshooting.
Indicates an open water pressure switch, usually related to water flow.
Indicates no low voltage to the control, often due to a tripped breaker or blown fuse.
Details symptoms and sequence of operation for the Hot Gas Bypass system.
General safety warnings and precautions for servicing heat pumps.
Indicates a low pressure switch opening, often due to refrigerant loss.
Indicates a high pressure switch opening, often due to restricted water flow.
Errors related to water temperature sensors (PO/OP, Pc/SH) and troubleshooting.
Errors related to defrost sensors (dPO/cOP, dPc/cSH) and troubleshooting.
Indicates an open water pressure switch, usually related to water flow.
Indicates no low voltage to the control, often due to a tripped breaker or blown fuse.
Details symptoms and sequence of operation for the Hot Gas Bypass system.
General| Model | HCB110BTA |
|---|---|
| Phase | Single |
| Amperage | 50A |
| Compressor Type | Scroll |
| Refrigerant | R410A |
| Heating Capacity | 110, 000 BTU/h |
| Cooling Capacity | 90, 000 BTU/h |
| Voltage | 208/230V |
To Next Page
