Name: Hayward HL32950VSP
Brand: Hayward
Rating: 4 (1 reviews)

To Next Page

To Previous Page

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

Introduction

This manual assumes that the VS Omni has been installed and conﬁgured according to the Installa-

tion Manual. The VS Omni can now be programmed with user desired settings such as schedules,

themes, and favorites. This manual will also explain how to manually turn pool equipment on/off,

program settings for speciﬁc equipment, view pool equipment status and conditions, and more.

Now that the initial conﬁguration has been completed, the VS Omni will automatically go to the

Home Screen or Idle Screen. All settings and operation functions can be accessed from the Home

Screen. Note that if the VS Omni Control Pad is not touched for more than two minutes, the Idle

Screen will be displayed.

Using the Control Pad

The VS Omni uses the Control Pad touchscreen as the main interface with the device. Once

conﬁgured, the VS Omni can be controlled remotely by internet enabled devices such as comput-

ers, tablets, and phones. The Control Pad must be used to access the Conﬁguration Wizard. The

Conﬁguration Wizard is used for initial conﬁguration (completed during the installation process) and

for any changes to existing conﬁguration.

Idle Screen

The Control Pad will display the idle screen after two minutes of user inactivity. When the ﬁlter

pump is on, the Idle Screen will display the current temperature of the pool on the left side of the

screen. On the right side of the screen, the time will be displayed and the air temperature will

toggle with the date as well as other information.

9:13 PM

FRIDAY

jul 13

Hayward HL32950VSP User Manual

Other manuals for Hayward HL32950VSP