Need help?Do you have a question about the Hayward HP40B and is the answer not in the manual?
General| Model | HP40B |
|---|---|
| Category | Heat Pump |
| Heating Capacity | 40, 000 BTU/hr |
| Phase | 1 |
| Hertz | 60 Hz |
| Compressor Type | Scroll |
| Refrigerant | R-410A |
| COP | 5.0 |
| Voltage | 208/230V |
| Operating Temperature Range | 50°F - 104°F |
Illustrates the water piping connections for the heat pump, showing valves and filter placement.
Details the electrical connections required for the heat pump, including user's electric box and terminal board.
Describes the display content when the machine is turned off (Time) or on (Water temperature).
Procedures to check machine installation, wiring, power, temperature settings, and air inlet/outlet before operation.
Steps for initial operation including starting pump, checking leaks, setting temperature, and compressor start-up delay.
General advice on setting temperature, outdoor installation, avoiding obstructions, and handling the unit.
Guidelines on keeping power switches from children, automatic restart, lightning protection, and draining the unit.
To Next Page