Hayward SP0735 User Manual

1
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
4 WAY BALL VALVE
Owner’s Manual
MODELS: SP0735 AND SP0735S
IMPORTANT SAFETY INSTRUCTIONS
Basic safety precautions s
h
ou
ld
a
l
ways
b
e fo
ll
owe
d
, inc
l
u
d
ing t
h
e fo
ll
owing: Fai
l
ure to fo
ll
ow instructions
can cause severe injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for
one of the following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property
damage and if ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or property
damage and if ignored presents a potential hazard. It can also make consumers aware of actions that are
unpredictable and unsafe.
The NOTICE label indicates special instructions that are important but not related to hazards.
Hayward Pool Products
620 Division Street, Elizabeth, NJ 07207
Phone: (908) 355-7995
www.hayward.com
Contents
General Warnings…………….……2
Replacement Parts…….…..…..…4
Valve Installation…….……….……4
Valve Operation………..……………4
Winterization…………..…….………4
IS0735 Rev B

Hayward SP0735 Specifications

General

Brand	Hayward
Model	SP0735
Category	Control Unit
Language	English

Summary

Important Safety Instructions

Safety Alert Symbol

WARNING Definition

CAUTION Definition

Suction Entrapment Hazards

Entrapment Types

Describes hair, limb, body, evisceration, and mechanical entrapment hazards.

Reducing Entrapment Risks

Requirements for suction outlet installation to prevent entrapment hazards.

Pressure Test Plugs Warning

Failure to remove plugs can increase suction entrapment risk.

Debris Warning

Keep outlets clear of debris to prevent suction entrapment.

Component Lifespan Warning

Suction outlet components have finite life; inspect/replace regularly.

Child Access Prevention

Hazardous Pressure Safety

Follow instructions to prevent violent separation of system components.

Separation Hazard Safety

Ensure components are secured, undamaged, and correctly assembled.

Pressure Limits & Purging

Do not exceed 50 PSI. Use low-pressure blower for purging.

Electrical Shock Hazards

Wiring Compliance & Safety

Extension Cord Prohibition

Power Interruption

Grounding Requirement

Bonding Requirement

GFCI Protection

Pool and Spa Usage Warnings

Hyperthermia Risk

Valve Installation and Operation