To Next PageTo Next PageWhat to do for Inrush current preventing relay error in Hayward Water Pump?
If your Hayward Water Pump shows an Inrush current preventing relay error, contact Hayward Technical Service at (908) 355-7995 for assistance.
What to do if Hayward SP1580X15VSP shows IPM temperature sensor circuit error?
If your Hayward Water Pump displays an IPM temperature sensor circuit error, it's recommended to contact Hayward Technical Service at (908) 355-7995 for assistance.
General| Model | SP1580X15VSP |
|---|---|
| Category | Water Pump |
| Type | Variable Speed Pump |
| Horsepower | 1.5 HP |
| Voltage | 115/230V |
| Motor Type | Permanent Magnet |
| Energy Efficiency | Energy Star Certified |
| Phase | Single Phase |
| Warranty | 3 Years |
Explains safety symbols, general precautions, and installer responsibilities.
Covers electrical wiring, grounding, bonding, GFCI requirements, and shock hazards.
Details risks like hair, limb, body, evisceration, and mechanical entrapment.
Addresses entrapment risks, hazardous pressure, separation hazards, and fire/burn risks.
Emphasizes electrical code compliance, grounding, bonding, and wiring.
Details how to properly ground and bond the pump for safety.
Provides a list of error codes and their corresponding troubleshooting steps.
Step-by-step guide for replacing the shaft seal.
Covers common issues like motor not starting, low flow, and noisy operation.
