To Next PageTo Next PageWhy does my Hayward SP32900VSP Water Pump say 'Check System Pump failed to start'?
If your Hayward Water Pump displays 'Check System Pump failed to start', inspect the impeller, diffuser, shaft seal, and motor for any issues or binding.
What to check if my Hayward Water Pump displays 'Check System Communication failed'?
Verify the connections between the user interface and motor/drive on your Hayward Water Pump.
General| Model | SP32900VSP |
|---|---|
| Category | Water Pump |
| Type | Variable Speed |
| Horsepower | 3.0 HP |
| Voltage | 230V |
| Phase | Single |
| Warranty | 3 years |
| Port Size | 2 inches |
| Maximum Head | 90 ft |
All electrical wiring must conform to codes. Hazardous voltage can shock, burn, cause death. Use GFCI.
Hazards from damaged suction outlets include hair, limb, body, evisceration, and mechanical entrapment.
Pool and spa systems operate under hazardous pressure. Follow instructions to avoid violent separation.
Improperly secured components can cause violent separation of pump parts. Secure strainer cover properly.
Emphasizes conforming to codes, grounding, bonding, and using copper conductors for electrical connections.
Instructions for grounding the pump and bonding to the pool structure to prevent electrical shock hazards.
Details on permanent connection to circuit, using circuit breaker as switch, and bypassing time clocks.
Diagram and attention notes for connecting the main power supply to the pump's drive unit.
Detailed steps for filling the strainer housing, starting the pump, and achieving prime, with safety warnings.
Details on setting time, day, speed selection, max/min speeds, prime duration, and low temperature operation.
Instructions for programming timers, setting speeds, start/stop times, and selecting operating days for each timer.
Guidance on cleaning, lubricating, and correctly installing the ceramic and spring seal components.
Addresses common issues like motor not starting, shutting off, humming, or pump not priming.
Diagnoses causes of low flow, including clogs, undersized piping, restricted filters, air leaks, or impeller issues.
Identifies causes of pump noise such as air leaks, vibration, foreign matter, or bearing issues.
Lists system error codes and their corresponding troubleshooting steps for diagnosing drive and communication issues.
