Hayward VR1000 - User Manual

PN: ISVR1000 Rev: M
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Pomona, CA Clemmons, NC Nashville, TN
Tel: 908.351.5400 www.haywardpool.com
Model VR1000
OWNERS MANUAL
OPERATION, & PARTS
Basic safety precautions should always be followed, including the following: Failure to follow instructions can cause severe
injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for one of the
following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property damage and if
ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or property damage
and if ignored presents a potential hazard. It can also make consumers aware of actions that are unpredictable and unsafe.
The NOTICE label indicates special instructions that are important but not related to hazards.
THIS MANUAL CONTAINS IMPORTANT INFORMATION ON THE OPERATION,
AND SAFE USE OF THIS EQUIPMENT.
THIS MANUAL IS INTENDED FOR THE END USER OF THIS PRODUCT.

Summary

Introduction and Safety Overview

Safety Alert Symbol and Signal Words

Explains safety symbols like WARNING, CAUTION, and NOTICE.

Important Safety Instructions

Electrical Safety Precautions

Covers grounding, GFCI protection, and bonding requirements for electrical safety.

Suction Entrapment Hazard Prevention

Details hazards like hair, limb, body, and mechanical entrapment at suction outlets.

Operational Safety and Definitions

Entrapment Hazard Mitigation

Outlines requirements for suction outlets to prevent entrapment.

Operational Warnings and Precautions

Covers hazards like pressure, fire, and improper component use.

System Overview and Installation Requirements

VR1000 System Description

Installation and Wiring Guidelines

Component Identification and Wiring Diagrams

Electrical Wiring Schematics

System Status Screens and Error Handling

Error and Exception Screen Interpretation

Vacuum Monitoring and User Modes

Interpreting Vacuum Status Indicators

Troubleshooting System Errors

Timer Event Programming

Timer Modes: 7-Day vs. Each Day

Setting Pump ON;OFF Schedules

System Operation Modes

Normal Operation States

Describes the system's Startup, Stabilizing, and Monitoring phases.

Vacuum Anomaly Response

Details how the system reacts to vacuum anomalies to prevent entrapment.

Installation: Plumbing, Electrical, and Grounding

Electrical Safety and Wiring Standards

Emphasizes grounding, GFCI, voltage matching, and NEC compliance.

Grounding and Bonding Requirements

Details the process for grounding the motor and bonding the system.

Pre-Operation Checks and Priming

Wiring and Start-Up Procedures

Pump Priming and Operation Safety

Explains how to prime the pump and critical safety rules.

Maintenance, Storage, and Testing Procedures

Entrapment Protection Testing

Hayward VR1000 Specifications

General

Brand	Hayward
Model	VR1000
Category	Lighting Equipment
Language	English