Need help?Do you have a question about the Hayward AquaRite series and is the answer not in the manual?
General| Category | Salt Chlorination System |
|---|---|
| Salt Level | 2700-3400 ppm |
| Voltage | 120V/240V |
| Chlorine Output | 1.45 lbs/day |
| Pool Size | 40, 000 gallons |
| Flow Rate | 20 GPM |
| Water Temperature Range | 50°F - 100°F (10°C - 38°C) |
Diagnosing issues when the "Check Salt" or "Inspect Cell" LEDs are flashing or ON.
Verifying the programmed TurboCell model matches the installed cell.
Steps for replacing the TurboCell and checking if LEDs cleared after replacement.
Diagnosing and resolving the "High Salt" LED indicator.
Inspecting the TurboCell and resetting the average salt level for high salt issues.
Replacing the TurboCell if the "High Salt" LED does not clear.
Formula to calculate the amount of water to drain for high salt conditions.
To Next Page