Need help?Do you have a question about the Hayward Goldline Controls Aqua Logic AQL-P-4 and is the answer not in the manual?
General| Brand | Hayward |
|---|---|
| Model | Goldline Controls Aqua Logic AQL-P-4 |
| Category | Lighting Equipment |
| Language | English |
Explains automated control of pool/spa equipment for efficient operation.
Details automatic chlorine generation using the optional AQL-CL kit.
Describes the main display and its scrolling information for system status.
How to manually turn single and two-speed filter pumps on and off.
Manual control for lights and auxiliary outputs, including dimmer settings.
Switching between pool, spa, and spillover modes using the control.
Procedures to enter service or service-timed modes for maintenance.
Step-by-step instructions for using the keypad to program functions.
Adjusting desired temperatures for spa, pool, and solar heating.
Controlling super chlorination and chlorinator output levels for spa/pool.
Configuring day, time, display backlight, and keypad beeper.
Process for pairing wireless remotes with the Aqua Logic system.
Programming automatic on/off times for the filter pump.
Setting timed schedules for automatic spa operation.
Programming timed schedules for lights and auxiliary outputs.
Programming automatic on/off times for Valve3.
Configure chlorinator, cell type, and pool/spa operational modes.
Configure pump speed, freeze protection, heater, and solar features.
Configure lights and auxiliary outputs, including interlock and freeze protection.
Configure Valve3 function and remote menu access options.
Step-by-step instructions for manual spa operation.
Guide to programming and executing automatic spa operations.
Adjusting desired temperatures and chlorine output levels.
Instructions for setting timers and managing superchlorination.
Recommended levels for maintaining balanced pool water chemistry.
Importance of salt level and maintaining it within the optimal range.
Guidance on appropriate salt types and how to add salt.
Procedures for inspecting, cleaning, and acid washing the electrolytic cell.
Steps for winterizing and spring start-up of the system.
How to use service and service-timed modes for diagnosing issues.
Understanding the "CHECK SYSTEM" LED and its potential causes.
Viewing salt, flow, and sensor status for diagnostics.
Verifying software versions for the main unit and remote devices.
To Next Page