5
Automatic System Operation
The Aqua Logic controls most of your pool equipment automatically in order to minimize the time spent
working on your pool. Most of the pool equipment can be programmed to operate on a timeclock basis.
In addition, the desired pool and spa temperatures and pool and spa chlorinator settings can be pro-
grammed. This section will guide you on how to program the automatic operation for each function.
The programming of automatic functions can be performed at either the main display/keypad located at the
pool equipment pad or the in-home remote display/keypad.
Using the programming buttons
There are 5 buttons on each keypad that are used for programming (refer to diagram).
There are 4 steps to programming any function:
1.
Menu
Press the “MENU” button to get to the desired menu. Multiple pushes of the
button will rotate through all 5 menus and return to the starting point.
2.
Press either key to scroll through the various items in the selected menu. Multiple
pushes of the button will rotate through all menu items and return to the starting
point. Only menu items that are applicable to your pool will appear. (Example: if
you don’t have a spa, then no spa related menu items will appear).
3. Once a menu item has been selected above, the current setting/selection will ap-
pear (flashing) on the display. Use the “+” and/or “-” keys to change this selec-
tion. Sometimes “+” and “-“ will adjust a value up or down (example: heater
temperature setting or timeclock on/off time). In this case, pushing the “+” or “-”
will change the value by one increment and holding the “+” or “-” button in for
more than one second will make the values auto scroll. In other cases, the “+” and
“-“ may toggle between 2 options (example: turning superchlorination ON or
OFF).
4.
Menu
After you have adjusted the item to the desired value, simply move on to the next
menu item to “lock in” your new setting. The Aqua Logic memory will maintain
the setting, even if power is removed for an extended period.
Settings
Menu
Display
“+” and “-” Buttons
Menu Button
Adust
Select Desired Menu
Select Items from
a Menu
“<” and “>” Buttons
+
>
>
Menu
To Next Page
Loading...
Need help?
General
