To Next PageTo Next Page
Need help?Do you have a question about the Hayward AQL-CHEM and is the answer not in the manual?
Samples pool water, indicates oxidation-reduction potential (redox) for sanitizer activity and water quality.
Samples pool water, indicates acidity. Balances pool water pH when used with a dispensing device.
Houses probes, provides water collection/testing location. Connects to filtration system supply/return.
For Pro Logic PL-PS-4/PL-P-4 models with software <4.00 to add pH control.
Plug-in receptacle for pH dispensing devices like peristaltic pumps or solenoid valves.
Includes necessary tubing, tubing connectors, and mounting hardware for installation.
Details steps for mounting the Probe Cell, a key component for water sampling.
Explains how to connect the Probe Cell to the pool plumbing for water flow.
Guide for inserting the ORP and pH probes into the Probe Cell.
Instructions for connecting the ORP and pH probe cables to the Probe Cell's communication box.
Details how to connect the Probe Cell cable to the Aqua Rite Pro or Pro Logic controller.
Instructions for wiring the pH dispensing pigtail to the control unit.
Steps to configure the Aqua Rite Pro or Pro Logic for the AQL-CHEM sensing kit.
How to confirm that the installed system is functioning correctly.
Guidance on setting up a routine maintenance plan for the system.
Guidance on maintaining proper pool water chemistry for system accuracy.
Instructions on cleaning and caring for the ORP and pH probes to ensure functionality.
Procedures for storing probes correctly when they are removed from the Probe Cell.
Steps to set the desired ORP level for optimal pool water sanitization.
Selects chlorine generation method: ORP Auto Sensing or Timed.
Sets the target pH level for automatic dispensing of pH reducer.
Configures high and low alarms for the pool's pH level.
Sets a timeout to prevent continuous pH reducer dispensing due to errors.
Sets the desired ORP level for automatic chlorine generation.
Configures high and low alarms for the pool's ORP level.
Keeps the filter pump running until sanitizer and pH levels are met.
Shuts down ORP control if it runs continuously due to probe errors.
Guides the user through automatic configuration of the AQL-CHEM sensing kit.
Enables the AQL-CHEM sensing system.
Sets pH control mode: Disabled, Auto Sensing, or Forced On.
Samples pool water, indicates oxidation-reduction potential (redox) for sanitizer activity and water quality.
Samples pool water, indicates acidity. Balances pool water pH when used with a dispensing device.
Houses probes, provides water collection/testing location. Connects to filtration system supply/return.
For Pro Logic PL-PS-4/PL-P-4 models with software <4.00 to add pH control.
Plug-in receptacle for pH dispensing devices like peristaltic pumps or solenoid valves.
Includes necessary tubing, tubing connectors, and mounting hardware for installation.
Details steps for mounting the Probe Cell, a key component for water sampling.
Explains how to connect the Probe Cell to the pool plumbing for water flow.
Guide for inserting the ORP and pH probes into the Probe Cell.
Instructions for connecting the ORP and pH probe cables to the Probe Cell's communication box.
Details how to connect the Probe Cell cable to the Aqua Rite Pro or Pro Logic controller.
Instructions for wiring the pH dispensing pigtail to the control unit.
Steps to configure the Aqua Rite Pro or Pro Logic for the AQL-CHEM sensing kit.
How to confirm that the installed system is functioning correctly.
Guidance on setting up a routine maintenance plan for the system.
Guidance on maintaining proper pool water chemistry for system accuracy.
Instructions on cleaning and caring for the ORP and pH probes to ensure functionality.
Procedures for storing probes correctly when they are removed from the Probe Cell.
Steps to set the desired ORP level for optimal pool water sanitization.
Selects chlorine generation method: ORP Auto Sensing or Timed.
Sets the target pH level for automatic dispensing of pH reducer.
Configures high and low alarms for the pool's pH level.
Sets a timeout to prevent continuous pH reducer dispensing due to errors.
Sets the desired ORP level for automatic chlorine generation.
Configures high and low alarms for the pool's ORP level.
Keeps the filter pump running until sanitizer and pH levels are met.
Shuts down ORP control if it runs continuously due to probe errors.
Guides the user through automatic configuration of the AQL-CHEM sensing kit.
Enables the AQL-CHEM sensing system.
Sets pH control mode: Disabled, Auto Sensing, or Forced On.
General| Brand | Hayward |
|---|---|
| Model | AQL-CHEM |
| Category | Lighting Equipment |
| Language | English |
