U3
SAFETY INSTRUCTIONS
4
Conversions and modifications
The transducer must not be modified from the design or safety engineering point of view
except with our express agreement. Any modification shall exclude all liability on our part
for any damage resulting therefrom. Mounting and removing the adapter in accordance
with Chapter 7 excluded.
Qualified personnel
This instrument is only to be installed by qualified personnel strictly in accordance with
the technical data and with the safety rules and regulations which follow. It is also
essential to observe the appropriate legal and safety regulations for the application
concerned. The same applies to the use of accessories.
Qualified personnel means persons entrusted with the installation, fitting, commissioning
and operation of the product who possess the appropriate qualifications for their func
tion.
Conditions on site
Protect the transducer from damp and weather influences such as rain, snow, etc.
Maintenance
The U3 force transducer is maintenance free. We recommend to calibrate the force
transducer at regular intervals.
Accident prevention
Although the specified nominal force in the destructive range is several times the full
scale value, the relevant accident prevention regulations from the trade associations
must be taken into consideration.
To Next Page
