Need help?Do you have a question about the HBM 1-RTN/M2LAR2.2T and is the answer not in the manual?
Dangers arising from incorrect installation or operation by untrained personnel.
Explanation of residual dangers and symbols used in the instructions (Caution, Note, CE mark).
Ensuring clean, level areas, rigid foundations, and aligned mounting bores for proper installation.
Achieving even load distribution and correct height level at bearing points using spacer plates.
Caution against shock loads when lowering the tank onto bearing points to prevent damage.
Procedure for replacing the dummy with the actual load cell after module mounting.
Step-by-step guide for mounting load cells on 4.7 t capacity modules, including anti-liftoff and stops.
Step-by-step guide for mounting load cells on 10 t to 33 t capacity modules.
Detailed technical specifications for RTN/M2LA modules with rubber-metal bearing.
Detailed technical specifications for RTN/M2LB modules with pendulum bearing.
Dangers arising from incorrect installation or operation by untrained personnel.
Explanation of residual dangers and symbols used in the instructions (Caution, Note, CE mark).
Ensuring clean, level areas, rigid foundations, and aligned mounting bores for proper installation.
Achieving even load distribution and correct height level at bearing points using spacer plates.
Caution against shock loads when lowering the tank onto bearing points to prevent damage.
Procedure for replacing the dummy with the actual load cell after module mounting.
Step-by-step guide for mounting load cells on 4.7 t capacity modules, including anti-liftoff and stops.
Step-by-step guide for mounting load cells on 10 t to 33 t capacity modules.
Detailed technical specifications for RTN/M2LA modules with rubber-metal bearing.
Detailed technical specifications for RTN/M2LB modules with pendulum bearing.
General| Brand | HBM |
|---|---|
| Model | 1-RTN/M2LAR2.2T |
| Category | Accessories |
| Language | English |
To Next Page
