Need help?Do you have a question about the HBM RTN/M2 Series and is the answer not in the manual?
General| Brand | HBM |
|---|---|
| Model | RTN/M2 Series |
| Category | Accessories |
| Language | English |
Ensures proper application and adherence to safety regulations for weighing modules.
Highlights risks arising from improper installation and operation by untrained personnel.
Defines residual risks associated with weighing technology that require operator planning.
Advises on material compatibility and protective coatings for specific environmental exposures.
States that unauthorized modifications void liability and are not permitted.
Specifies that installation and operation must be performed by appropriately qualified individuals.
Emphasizes compliance with trade association regulations for accident prevention.
Identifies specific markings and their meanings for user safety and information.
Details requirements for clean, level assembly areas and rigid foundations.
Instructions for applying grease to minimize friction during load cell installation.
Explains the purpose and placement of spacer plates for vertical adjustment.
Procedure for replacing the dummy with the actual load cell.
Specific steps for mounting load cells for capacities up to 4.7 tons.
Specific steps for mounting load cells for capacities from 10 to 33 tons.
Guidance on adjusting horizontal stops to comply with permissible shifts.
Detailed dimensional drawings and specifications for the rubber-metal bearing version.
Detailed dimensional drawings and specifications for the pendulum bearing version.
Technical data and limits for the RTN/M2LA weighing modules.
Lists the different product type designations for the RTN/M2LA series.
Technical data and limits for the RTN/M2LB weighing modules.
Lists the different product type designations for the RTN/M2LB series.
Details the components included with the weighing module assembly.
To Next Page
