Need help?Do you have a question about the HBM U3 and is the answer not in the manual?
General| Brand | HBM |
|---|---|
| Model | U3 |
| Category | Transducer |
| Language | English |
Details proper usage and adherence to regulations for safe operation of the transducer.
Outlines potential hazards from non-compliance and inherent residual risks of the U3 force transducer.
Explains symbols used for warnings, attention, and notes in the mounting instructions.
Prohibits unauthorized modifications and outlines liability exclusions.
Specifies that installation and operation must be done by qualified personnel.
States the transducer is maintenance-free and notes accident prevention considerations.
Lists the U3 force transducer and operating manual included in the package.
Details available accessories like adapters and knuckle eyes for mounting.
Describes the suitability of U3 transducers for tensile and compressive forces.
Emphasizes careful handling and protection of the transducer's housing and seal.
Explains the measuring element composed of stainless steel and strain gauges.
Describes the housing structure and the need for protection against mechanical damage.
Discusses the impact of ambient temperature, moisture, and deposits on performance.
Covers essential precautions like gentle handling and overload prevention.
Provides principles for force direction, alignment, and avoiding moments.
Details methods for tensile/compressive loading, including adapter and knuckle eye use.
Explains cable connection, shielding concept, and EMC considerations.
Offers guidance on cable routing, avoiding interference, and earthing.
Details the pin assignment for the six-wire connection of the transducer.
Lists detailed technical data including force, sensitivity, temperature, and dimensions.
Provides detailed drawings and dimensional data for different force ranges.
Presents specifications and dimensions for knuckle eyes and adapters.
States conformity with EC directives and quality system certification.
To Next Page
