Need help?Do you have a question about the HBM T40B and is the answer not in the manual?
General| Type | Torque Transducer |
|---|---|
| Accuracy Class | 0.05 |
| Measuring Range | 0 to 100% of nominal torque |
| Beam Width | Not applicable |
| Impedance | Not applicable |
| Power Supply | 11 to 30 VDC |
FCC compliance statement for Option 7, Code U, detailing conditions for operation.
Industry Canada compliance information for Option 7, Code U, regarding product approval status.
Explains symbols used on the transducer and their significance in the manual.
Highlights how important instructions for safety are identified within the document.
Describes the T40B torque flange's capability to measure static and dynamic torques on shafts.
Details the components of the torque flange, including rotor, stator, and antenna ring.
Provides critical safety precautions and handling advice for installing the torque flange.
Outlines the two primary options for mounting the torque flange, with or without dismantling the antenna ring.
Guides the user through installing the rotor and stator, including handling tips.
Explains the optional rotational speed measuring system and its integration into the transducer.
Provides general guidelines for connecting cables and ensuring proper connections.
Explains the importance of EMC protection and how to achieve it for the measuring chain.
Details the pin assignments for the various connectors on the stator housing.
Specifies the required supply voltage range and precautions for operating the transducer.
Explains how to trigger the shunt signal using an external voltage and the associated parameters.
Describes the meaning of different LED colors and patterns indicating rotor status.
Explains the LED indicators for stator status and potential issues.
Details how to measure dynamic torque and calculate the natural frequency of the mechanical arrangement.
States that the T40B torque flanges are maintenance-free.
Explains the statutory waste disposal mark and regulations for electrical/electronic products.
Details the structure of order numbers and the meaning of different codes for product configuration.
Lists connection cables, cable sockets, and other accessories available for order.
Provides detailed technical specifications for torque measuring systems from 50 Nm to 500 Nm.
Lists detailed technical specifications for torque measuring systems from 1 kN·m to 10 kN·m.
Specifies the axial and radial run-out tolerances for different measuring ranges of the torque flange.
Provides detailed dimensional drawings for T40B models without rotational speed measurement.
Shows detailed dimensional drawings for T40B models equipped with rotational speed measurement.
To Next Page
