Need help?Do you have a question about the HBM T12 and is the answer not in the manual?
General| Brand | HBM |
|---|---|
| Model | T12 |
| Category | Transducer |
| Language | English |
Describes FCC rules compliance for device operation and interference.
Details Industry Canada compliance and operating conditions.
Defines intended use, limits, and safe handling practices.
Outlines measures to prevent accidents and general safety concerns.
Covers transducer modifications, selling, and qualified personnel requirements.
Explains symbols found on the transducer or stator.
Describes warning, caution, and information symbols used in the manual.
Covers careful handling, overload prevention, and mounting considerations.
Discusses environmental factors and mounting orientation.
Step-by-step guide for installing the slotted disc for speed measurement.
Instructions for attaching the rotor, emphasizing care for the measuring zone.
Details on installing the optional protection against contact components.
Covers stator mounting, alignment using spacers, and final tightening.
Explains axial and radial alignment for the optional speed/angle system.
Describes LED colors and their meaning during normal operation.
Explains LED indicators for rotor-stator alignment status.
Details LED meanings for setting the optical speed system.
Provides guidance on connecting to CAN/PROFIBUS and cable selection.
Explains cable shielding and grounding concepts for noise reduction.
Details pin configurations for plugs 1 through 5.
Specifies the required DC supply voltage range and connection details.
Discusses dynamic torque measurement and permissible oscillation limits.
Describes the structure and content of TEDS data stored in the transducer.
Instructions for cleaning the optical system and slotted disc.
Information on proper disposal of the device and packaging.
Detailed technical specifications for this torque range.
Detailed technical specifications for this torque range.
Technical data for the rotational speed and angle measurement system.
Details on resolution, frequency ranges, and power measurement.
Information on CAN Bus and PROFIBUS DP protocols and data rates.
Covers electromagnetic compatibility and environmental resistance.
Provides data on stiffness, inertia, and tolerances.
Drawings and table of dimensions for the rotor.
Drawings and table of dimensions for the rotor.
Drawings and table for stator with optional speed system.
Drawings and table for stator with optional speed system.
Drawings and table for stator with optional speed system.
Drawings and table for stator with optional contact protection.
Drawings and table for stator with optional contact protection.
Drawings and table for stator with optional contact protection.
Drawings and table for stator with optional contact protection.
Dimensions for contact protection plates.
Dimensions for contact protection plates.
Table showing mounting dimensions a, b, c.
Specifies acceptable tolerances for axial and radial run-out.
Configuration settings for torque measurement, including filters and scaling.
Settings for rotational speed and angle measurement.
Configuration of frequency output signals.
Configuration of analog output signals.
Configuration for power measurement.
Settings for signal processing like shunt and zero compensation.
Configuration for angle of rotation measurement.
Setup for limit value monitoring and additional functions.
Procedures for saving and loading transducer parameters.
Steps to load parameters from the transducer.
Codes for selecting the torque measuring range.
Codes for selecting the accuracy class.
Codes for selecting rotational speed options.
Codes for electrical output configurations.
Codes for selecting bus interfaces like CANopen or PROFIBUS.
Codes for choosing the rotational speed measuring system.
Codes for selecting protection against contact.
Codes for selecting coupling options.
Codes for custom modifications.
Lists available connection cable sets.
Lists available plugs and sockets.
Lists accessories specific to CAN Bus.
Lists accessories specific to PROFIBUS.
Lists cable by meter options.
Lists miscellaneous accessories.
To Next Page
