HBM T12 - Ordering Numbers; Measuring Range Options; Accuracy Options; Rotational Speed Options

87
T12
A1979−10.0 en HBM
19 Ordering numbers
L
Dependent on meas. range up to 15 000 rpm
Order no.:
K-T12 −
Ordering example:
K-T12 −
SF
1C
500Q
Code Option 1: measuring range
S002R 2 kNm
S003R 3 kNm
Code Option 7: protection against contact
Without protection against contact
Code Option 2: accuracy
S Standard
G
"
Greater accuracy
1)
Lin. t"0.01% and TK
0
t"0.01%/10 K
L
Code Option 6: rotational speed measuring system
1 With optical rotational speed measuring system;
360 or 720 pulses/revolution
With optical rotational speed measuring system;
360 or 720 pulses/revolution and reference signal
N Without rotational speed measuring system
Code Option 5: bus connection
P CANopen and Profibus DPV1
C CANopen (2 device plugs)
1
N
S
Code Option 3: nominal (rated) rotational speed
H
Dependent on meas.range up to 18 000 rpm
S001R 1 kNm
S500Q 500 Nm
Code Option 4: electrical configuration
DF1 Output signal 60 kHz " 30 kHz
DU2 Output signal 60 kHz " 30 kHz and
"10 V
SF1 Output signal 10 kHz " 5 kHz
SU2
Output signal 10 kHz " 5 kHz and
"10 V
With protection against contactY
N
Code Option 8: MODULFLEX
)
coupling
2)
Without couplingN
With fitted coupling
N
A
Y
11)
For voltage output: lin. t"0.05% ;
TK
0
t"0.1%/10 K
2)
For Option 3, code L only; see
data sheet B1957-xx de for
specifications.
S
Code Option 9: Customized modification
No customized modificationN
N
S005R 5 kNm
S010R 10 kNm
S200Q 200 Nm
S100Q 100 Nm