Need help?Do you have a question about the HBM SK6 and is the answer not in the manual?
General| Category | Transducer |
|---|---|
| Accuracy class | 0.02 |
| Material | Stainless steel |
| Degree of protection per EN 60529 | IP67 |
| Sensitivity | 2 mV/V |
| Protection Class | III |
| Linearity | ±0.02% FS |
| Operating Temperature | -10°C to +70°C |
Defines the intended and unintended uses of the slipring assemblies.
Outlines risks arising from misuse or untrained operation.
Discusses safety considerations and residual risks in torque measurement technology.
Specifies that only qualified personnel should operate the transducer.
Safety measures required after mounting transducers for accident prevention.
Detailed procedure for mounting slipring assemblies using a mounting plate.
To Next Page
