EasyManua.ls Logo

HCI RM22AP - HCI Settings

HCI RM22AP
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Roommate AP Operations Manual Rev 1.0
HCI Settings
To access, run the Settings app (FUNCTION, 1236363, SETUP). Scroll up/down and select the setting(s) to
change. The setting options are available on the right menu. Scroll right to access the additional options.
Information
Build Number Displays the current firmware installed on the television.
Upgrade Firmware Allows for updating the current firmware installed on the television.
Options are Local Upgrade (from a USB) or Network Upgrade. You
must have the television connected to the internet to perform a Network
Upgrade.
Reboot Device Performs a soft reboot of the television. This will not erase any settings.
There is also a hard reset located between the side pillow speaker jack
and side USB port.
Ethernet IP Address Displays current IP address of television when using the Ethernet
connection.
Ethernet MAC Address Displays the MAC address of the television’s Ethernet port.
WIFI IP Address Displays the IP address of television when using the Wi-Fi connection.
Wi-Fi MAC Address Displays the MAC address of the television’s Wi-Fi card.
Model Number Displays the model number of the television.
Android Version Displays the Android version installed on the television.
Legal Information Display the legal information pertaining to the license of Android.
Kernel Version Displays the Kernel firmware installed on the television.
Home Screen
Home Screen Type Options are HCI or Android. HCI type will allow for custom icons on
home page, Android will display the standard icons.
Customize
App Icon
Display Choose default icon type or custom image to use for icon.
Color Choose color for default icon.
Image Chose image to use when custom image is selected.
Height Select Height of default icon.
Width Select Width of default icon.
App Text
Placement Choose the location of the text of the default icon.
Size Choose the font size of the default icon.
Font Choose the font of the default icon.
Style Choose the style of the default icon.
Color Choose the color of the default icon.