To Next Page

To Previous Page

PROBES AND ACCESSORIES continued

With the DVM-80UVM, if the cable is completely shorted the meter will read the line

voltage times 0.71. For a nominal 7.2kV circuit the meter will read approximately 5.1kV.

Listed here are the actual cable leakage currents for voltage readings on the

DVM-80UVM digital meter: Meter reading of 0.5kV = 8uA

Meter reading of 1.0kV = 16uA

Meter reading of 2.0kV = 31uA

REPAIRS

All repairs and calibration are performed at HD Electric Company.

If any damage is

found, please contact HD Electric Company at

847-473-4980 or saleshde@emerson.com to arrange for service.

Questions and Answers:

Need help?

Do you have a question about the HDE DigiVolt DVM-80UVM and is the answer not in the manual?

HDE DigiVolt DVM-80UVM Specifications

General