HEADRUSH MX5 - External MIDI Control

28
External MIDI Control
The HeadRush MX5 can be controlled by incoming MIDI CC (control change) messages from external MIDI gear.
These MIDI messages can be received from hardware connected to 1/8” (3.5 mm) MIDI Input only.
The chart below lists the available parameters that can be controlled by external MIDI hardware:
CC# Action CC# Action
50 Footswitch 1 74 Looper Reverse
51 Footswitch 2 75 Block 1 Toggle On/Off
52 Footswitch 3 76 Block 2 Toggle On/Off
64 Tap Tempo 77 Block 3 Toggle On/Off
65 Looper: 1/2 Speed 78 Block 4 Toggle On/Off
66 Looper: 2X Speed 79 Block 5 Toggle On/Off
67 Looper: 1/2 Loop 80 Block 6 Toggle On/Off
68 Looper: 2X Loop 81 Block 7 Toggle On/Off
69 Looper Start/Stop 82 Block 8 Toggle On/Off
70 Looper Record 83 Block 9 Toggle On/Off
71 Looper Insert 84 Block 10 Toggle On/Off
72 Looper Peel 85 Block 11 Toggle On/Off
73 Looper Mute