How to troubleshoot Health O Meter 1100KL that do not power on?
If your Health O Meter Scales do not power on, first, check the batteries and replace them if necessary. If the batteries are not the issue, try a different electrical outlet. Finally, if neither of these solutions works, the AC adapter may need to be replaced.
Why my Health O Meter 1100KL Scales does not power on?
If your Health O Meter Scales are not powering on, the issue could be due to several reasons: 1. **Dead Battery:** Try replacing the batteries. 2. **Faulty Electrical Outlet:** Test the scale with a different outlet. 3. **Bad Power Supply:** Consider replacing the AC adapter.
What to do if the battery icon is on Health O Meter 1100KL Scales?
If the battery icon appears on the display of your Health O Meter Scales, it means the batteries are running low and need to be replaced. Replace the batteries following the instructions on page 10.
Why does my Health O Meter 1100KL Scales display show ‘Lo bAtt’?
If your Health O Meter Scales display shows a “Lo bAtt” message, it means the batteries are discharged. Replace the batteries following the instructions provided.
What to do if Health O Meter 1100KL show questionable weight or do not zero?
If you're getting questionable weight readings or your Health O Meter Scales won't zero, consider these possibilities: 1. An external object might be interfering with the scale. Remove any obstructions. 2. The scale might not have shown “0.0” before weighing. Have the patient step off, zero the scale, and restart the weighing process. 3. The scale might not be on a level floor. Place the scale on a level floor and begin weighing process again. 4. The scale could be out of calibration. Check the weight with a known weight value. 5. Improper Tare. Place the item to be tared on the scale. Press REWEIGH. Once the weight of the item is displayed, press TARE. Place the patient and the tared item back on the scale. Press REWEIGH again.
What to do if Health O Meter Scales display shows “Over” message?
If your Health O Meter Scales display shows the “Over” message, it means that the load on the scale is exceeding its maximum capacity of 1000 lb / 454 kg. To resolve this, remove the excess weight and ensure you are using the scale within its specified limits.
How to fix “Lo bAtt” message on Health O Meter 1100KL Scales?
If your Health O Meter Scales display shows a “Lo bAtt” message, this indicates that the batteries are discharged. Replace the batteries following the instructions provided.
What to do if Health O Meter Scales show questionable weight?
If you're getting questionable weight readings or the Health O Meter Scales aren't zeroing correctly, consider these potential causes and solutions: * **External Interference:** Ensure there are no objects interfering with the scale. * **Incorrect Zeroing:** Have the patient step off the scale, zero it, and then restart the weighing process. * **Uneven Surface:** Place the scale on a level floor and re-weigh. * **Calibration Issues:** Check the weight using a known weight value. * **Improper Tare:** Place the item to be tared on the scale, press REWEIGH, then TARE. Place the patient and the tared item back on the scale, and press REWEIGH again.
What to do if Health O Meter 1100KL Scales gives questionable weight or does not zero?
If your Health O Meter Scales is giving questionable weight readings or not zeroing properly, consider the following: * **External Interference**: Ensure there are no objects interfering with the scale. * **Incorrect Zeroing**: Have the patient step off the scale, press the Zero or Clear button to reset it to 0.0, and then restart the weighing process. * **Uneven Surface**: Place the scale on a level floor and balance the feet by hand-tightening each foot completely, then backing it out 1 to 1½ full turns. * **Calibration**: Check the weight using a known weight value.
What does it mean when Health O Meter Scales display ‘Over’ message?
If your Health O Meter Scales display shows an “Over” message, it indicates that the load on the scale exceeds its capacity of 1000 lb / 454 kg. Remove the excess weight to use the scale within its limits.
General| Type | Digital Scale |
|---|---|
| Platform Dimensions | 12.5 x 12.5 inches |
| Display | LCD |
| Power | Battery |
| Platform Size | 12.5 x 12.5 inches |
| Auto-On | Yes |
| Auto-Off | Yes |
| Low Battery Indicator | Yes |
| Overload Indicator | Yes |
| Units | lbs/kg |
| Resolution | 0.2 lbs / 0.1 kg |
| Graduation | 0.2 lbs / 0.1 kg |
| Capacity | 400 lb / 180 kg |
Lists compliance standards and factory certifications for the scale.
Explains data transmission capabilities via USB or wireless technology.
Provides instructions for proper disposal of the electronic scale.
Prepares for assembly, checks for damage, and unpacks parts.
Lists all components and hardware included with the scale.
Specifies necessary tools for scale assembly.
Instructions for connecting the AC adapter or installing batteries.
Steps for correctly inserting and replacing batteries in the scale.
How to change and lock the weight unit (LB/KG).
Allows viewing alternate units when the primary unit is locked.
Configures scale audio feedback (silent or beep).
Manages automatic display power-off when using AC adapter.
Sets the inactivity period before the scale powers off.
Configures automatic zeroing upon scale power-up.
Instructions for setting the scale's internal clock.
Permanently locks the scale in KG or LB units, disabling the Unit button.
Identifies and describes the functions of each button on the scale's keypad.
Step-by-step guide for accurately weighing a patient.
How to retrieve and clear the last recorded weight measurement.
Calculates and displays a patient's Body Mass Index (BMI).
Subtracts the weight of an object (e.g., oxygen tank) from the patient's weight.
Manually enters a tare weight before weighing the patient.
Weighs a child held by a parent by subtracting the parent's weight.
General checks and maintenance procedures for the scale.
Proper methods for cleaning and disinfecting the scale.
Information on available replacement parts and how to order them.
Step-by-step guide for calibrating the scale using weight standards.
Lists common issues and their solutions for the scale.
Details the manufacturer's two-year warranty against defects.
Instructions on how to obtain warranty service, including contact info.
Information about purchasing an extended warranty plan.
To Next Page
