Why weighing process on Health O Meter Scales takes too long?
If the weighing process on your Health O Meter Scales takes too long, and the weight doesn't lock, it's likely because the patient is not sitting or standing still. Ask the patient to remain still.
Why Health O Meter Scales weighing process takes too long?
If the weighing process on your Health O Meter Scales is taking too long and the weight isn't locking on the display, it might be because the patient is not sitting or standing still. Ask the patient to remain still during the weighing process.
What to do if Health O Meter Scales display “Load Cell Cable Not Detected”?
If your Health O Meter Scales displays 'Load Cell Cable Not Detected', it means the load cell cable isn't fully connected. Check that the cable is securely plugged into the ports on the back of both the display head and the platform. Refer to pages 7 and 9 for visual guidance. If it was already plugged in, try unplugging it and plugging it back in until you hear a click.
General| Type | Digital Scale |
|---|---|
| Platform Dimensions | 12.5 x 12.5 inches |
| Display | LCD |
| Power | Battery |
| Platform Size | 12.5 x 12.5 inches |
| Auto-On | Yes |
| Auto-Off | Yes |
| Low Battery Indicator | Yes |
| Overload Indicator | Yes |
| Units | lbs/kg |
| Resolution | 0.2 lbs / 0.1 kg |
| Graduation | 0.2 lbs / 0.1 kg |
| Capacity | 400 lb / 180 kg |
Lists compliance standards and factory certifications for the scale.
Explains data transmission capabilities via USB or wireless technology.
Provides instructions for proper disposal of the electronic scale.
Prepares for assembly, checks for damage, and unpacks parts.
Lists all components and hardware included with the scale.
Specifies necessary tools for scale assembly.
Instructions for connecting the AC adapter or installing batteries.
Steps for correctly inserting and replacing batteries in the scale.
How to change and lock the weight unit (LB/KG).
Allows viewing alternate units when the primary unit is locked.
Configures scale audio feedback (silent or beep).
Manages automatic display power-off when using AC adapter.
Sets the inactivity period before the scale powers off.
Configures automatic zeroing upon scale power-up.
Instructions for setting the scale's internal clock.
Permanently locks the scale in KG or LB units, disabling the Unit button.
Identifies and describes the functions of each button on the scale's keypad.
Step-by-step guide for accurately weighing a patient.
How to retrieve and clear the last recorded weight measurement.
Calculates and displays a patient's Body Mass Index (BMI).
Subtracts the weight of an object (e.g., oxygen tank) from the patient's weight.
Manually enters a tare weight before weighing the patient.
Weighs a child held by a parent by subtracting the parent's weight.
General checks and maintenance procedures for the scale.
Proper methods for cleaning and disinfecting the scale.
Information on available replacement parts and how to order them.
Step-by-step guide for calibrating the scale using weight standards.
Lists common issues and their solutions for the scale.
Details the manufacturer's two-year warranty against defects.
Instructions on how to obtain warranty service, including contact info.
Information about purchasing an extended warranty plan.
To Next Page
