Healy TimeWaver - 4.3 Starting Treatment Without Smartphone; 4.4 Stopping Treatment Procedures; 5. Cleaning, Disinfection and Maintenance; 5.1 General Maintenance Principles

12 | EN Healy GmbH | Schloss Kränzlin | Darritzer Str. 6 | 16818 Kränzlin – Germany
4.3 Starting the Treatment without the Smartphone
The device always stores the last treatment program. By press-
ing the on-switch of the Healy hardware, the last program that
was sent from the smartphone to the device will start with an in-
tensity of 15%.
4.4 Stopping the Treatment
You can see the current progress of the program running on the
device by using the App.
To stop the treatment select one of the following:
• briey press the on/o-switch (pause mode)
• tap the icon in the treatment mode in the app (see gure 4.4.1)
• hold the on/o-switch for about 10 seconds until device hard-
ware resets
• in emergency situations it is possible to remove the electrodes
or disconnect the electrode cables
5. Cleaning, Disinfection and Maintenance
5.1 General
Maintenance activities increase the lifespan and safety of the
Healy. Cleaning and disinfection reduces the risks of cross con-
tamination and infections. Please read this section carefully.
Cleaning and disinfection should be performed once a week, or
if used by dierent patients prior to use.
Figure 4.1.5: Treatment page
with white time indicator –
electrical circuit is closed
Figure 4.1.6: Treatment page
with black time indicator –
electrical circuit is open