Healy TimeWaver - 6. System Components Included; 7. Technical Data; 7.1 General Technical Specifications

14 | EN Healy GmbH | Schloss Kränzlin | Darritzer Str. 6 | 16818 Kränzlin – Germany
Event or
message
Cause Actions required
No connection
from the smart-
phone to the
device
Device is
switched o
Switch on the device
and restart the App
No connection
from the smart-
phone to the
device
Bluetooth in
your smart-
phone is deac-
tivated.
Open connectivity
settings and activate
Bluetooth
Repeated short
blinking of right
LED
Batteries are
low
Charge the device
Device is not
responding
or
Undened
error/EM
disturbance
Hold the on-switch
for 10 seconds. This
triggers a hardware
reset.
No Stimulation
output
Undened
error/EM
disturbance
Contact your autho-
rized dealer or the ma-
nufacturer Healy GmbH
6. System Components
The Healy is delivered with a set of electrodes and a charging
cable.
Reference
number
Description Quantity
0006 Healy hardware device 1
108-4063 Press button adhesive electrodes
round Ø 32 mm
4
108-4062 Connection cable for electrodes
96 cm - press button on 2 mm
2
108-4068 Charging cable USB 0.15 m 1
7. Technical Data
7.1 General
Protection
against ingress of
water and parti-
culate matters
IP 42
Protected against particulate matter,
larger than 1mm. Protection against
dripping water at an angle of 15°.