Need help?Do you have a question about the Heat Controller BHD-651-G and is the answer not in the manual?
General| Product color | White |
|---|---|
| Water tank capacity | 10 L |
| Water level indicator | Yes |
| Suitable for room area up to | 232 m² |
| Suitable for room volume up to | - m³ |
Weight and Dimensions| Depth | 321 mm |
|---|---|
| Width | 394 mm |
| Height | 622 mm |
| Weight | 19050 g |
Essential safety measures to follow when servicing the unit to prevent hazards.
Procedure for conducting an insulation resistance test for electrical safety.
Overview of the dehumidifier's key features and capabilities.
Identification and description of the unit's control panel buttons and indicator lights.
Physical dimensions of the dehumidifier models.
Recommended environmental conditions for optimal dehumidifier operation.
Instructions for powering the dehumidifier on and off.
How to operate the unit using its internal water collection tank.
Procedure for connecting a hose for continuous condensate drainage.
Guidance on routine maintenance tasks for the dehumidifier.
Steps and indicators when powering on the unit and initiating self-diagnosis.
How to adjust the desired humidity level using the control buttons.
Explanation of the continuous mode and its operation.
Procedure for safely shutting down the dehumidifier.
Details on the 3-minute time delay feature for compressor restart.
Description of various protection mechanisms and error codes.
Procedures for testing the compressor for defects, including winding and ground tests.
Guidelines for repairing leaks and replacing components in the sealed refrigeration circuit.
Steps to test the fan motor's functionality and performance.
Methods for testing the run capacitor for the compressor and fan motor.
Classification of common troubleshooting issues: starting failure, ineffective AC, damage.
Explanation of PCB fault codes (P1, P2, E1, E2) and their meanings.
Detailed troubleshooting steps for abnormal water level protection and automatic alarms.
Procedure to check the humidity sensor when the display fails or shows errors.
Troubleshooting steps for units that fail to start or have motor problems.
Steps to diagnose and resolve unusual noises from the unit.
Table listing common complaints, their causes, and recommended remedies.
To Next Page
