Do you have a question about the Heat-N-Glo 6000XLSB and is the answer not in the manual?
Heating Capacity | Up to 2, 000 sq. ft. |
---|---|
Vent Type | Direct Vent |
Glass Type | Ceramic |
Type | Direct Vent Gas Fireplace |
Fuel Type | Natural Gas (NG) or Liquid Propane (LP) |
Efficiency | Up to 70% |
Control Type | Remote Control |
Ignition System | IPI (Intermittent Pilot Ignition) |
Ignition Type | Intermittent Pilot Ignition (IPI) |
Log Set Material | Ceramic Fiber |
Burner Material | Steel |
Warranty | Limited Lifetime |
Instructions for installing the direct vent system components and termination kits.
Procedures for attaching the first vent component and adding subsequent sections.
Guidance on adding vent sections, heat shields, and support brackets.
Procedures for installing firestops in walls and ceilings for vent systems.
Instructions for attaching and securing vent termination caps for horizontal and vertical runs.
Information about the standing pilot ignition system and its components.
Instructions for installing the gas supply line, including shut-off valves and leak checks.
Table of pressure requirements for natural gas and propane for the fireplace.