Heat Storm HS-1000-WX-WIFI User Manual (English)

Jesse PetersJul 30, 2025

What to do if my Heat Storm HS-1000-WX-WIFI doesn't work?

B
brycemathisJul 30, 2025
If your Heat Storm Heater doesn't seem to be working (display blinking, beeping sound), there are several things you can check: * First, ensure the heater is properly plugged into a working electrical outlet. * Make sure the temperature is set high enough. * Check if the Key lock is activated (refer to the "Key lock" section for instructions). * Inspect the air intake and outlet grille for any obstructions and remove them. * Confirm the heater is upright on a flat surface. * If the internal temperature is too high, unplug the heater, let it cool down for a few minutes, and then plug it back in. * If these steps don't resolve the issue, the temperature sensor might be malfunctioning, and you should contact De Longhi.

Model	HS-1000-WX-WIFI
Wattage	1000 Watts
Voltage	120 Volts
WiFi Capability	Yes
Safety Features	Overheat Protection, Tip-Over Switch
Remote Control	Yes
Type	Infrared Heater
Control Method	Remote Control, WiFi
Mounting	Wall-mounted

Model

HS-1000-WX-WIFI

Wattage

1000 Watts

Voltage

120 Volts

WiFi Capability

Yes

Safety Features

Overheat Protection, Tip-Over Switch

Remote Control

Yes

Type

Infrared Heater

Control Method

Remote Control, WiFi

Mounting

Wall-mounted

Summary

Safety & Awareness

Important Instructions

Follow basic safety precautions when using electrical appliances to reduce risk of fire, shock, and injury.

Installation & Instructions

Wall Installation

Instructions for properly installing the heater on a wall, including required tools and steps.

Questions & Answers

Blower Fan Operation After Shutdown

Explanation for why the blower fan continues to run after the heater is turned off.

Heating Element Replacement

Information on whether heating elements can be replaced and how to obtain replacements.

Hot Power Cord Concern

Addresses concerns about a hot power cord and plug, suggesting potential causes and solutions.

Diminished Airflow Troubleshooting

Troubleshooting steps for reduced airflow, focusing on blocked inlets or dirty filters.

Initial Room Heating Time

Estimates room heating time, noting variables like room size and insulation.

Operations & Controls

Control Panel Functions

Details on using the heater's control panel buttons for various functions like power, mode, and lock.

Operational Troubleshooting

Addresses common operational issues like fan behavior, smells, and error codes displayed on the unit.

Troubleshooting Guide

Initial Startup Issues

Explains why the heater may not blow air immediately upon powering on.

Temperature Reading Discrepancies

Discusses discrepancies between heater and central thermostat readings and calibration.

Post-Operation Fan Activity

Explains the cool-down phase where the fan continues to run after the heater is turned off.

No Warm Air Output

Troubleshooting steps for when the heater is not producing warm air, checking airflow and settings.

Connecting to Wi-Fi

Wi-Fi Setup (Auto Scan)

Steps to connect the heater to Wi-Fi using the Auto Scan method via the Smart Life app.

Wi-Fi Setup (Manual Connect)

Steps to connect the heater to Wi-Fi using the Manual Connect (EZ mode) via the Smart Life app.

AP Mode Connection

Instructions for connecting the heater to Wi-Fi using the AP Mode via the Smart Life app.

Maintenance

Washable Lifetime Filter System

Instructions for cleaning and maintaining the washable lifetime filter system.

Temperature Settings and Calibration

Selecting Celsius and Fahrenheit

How to switch between Celsius and Fahrenheit temperature display modes.

Setting the Temperature

Guide to adjusting the desired temperature using the heater's control panel or app.

Child Lock Feature

Instructions on how to enable and disable the child lock feature to prevent accidental changes.

Thermostat Calibration

Procedure for calibrating the heater's thermostat to match the home's central HVAC system.

Important Safeguards

General Safety Precautions

Essential safety guidelines covering electrical hazards, placement, and usage restrictions.

Burn and Overheating Warnings

Warnings related to potential burns, overheating, and proper usage to avoid fire hazards.

Mounting and Installation

Mounting the Feet

Steps for attaching the feet to the heater for freestanding use.

Wall-Mounting Installation

Details on the wall mounting kit components and procedure for installing the heater on a wall.

Operation and Use

Basic Operation Steps

Step-by-step guide on plugging in, turning on, and selecting operating modes for the heater.

Operating Modes Explained

Explanation of different heating modes like Freeze Prevention, Heating 1-3, and ECO plus function.

Key Lock and Timer Functions

How to use the key lock feature and set the timer for delayed start or stop.

Troubleshooting

Appliance Not Working

Solutions for when the appliance does not power on or function correctly.

Display Errors and Beeps

Troubleshooting display errors like blinking dots, 'PF', and 'Ht' codes.

Heat Storm HS-1000-WX-WIFI User Manual

Questions and Answers:

Heat Storm HS-1000-WX-WIFI Specifications