Heat Storm HS-1500-TRC

Need help?

Do you have a question about the Heat Storm HS-1500-TRC and is the answer not in the manual?

Summary

User Manual and Safety Instructions

Safety and Awareness Guidelines

Operations and Controls

Cleaning and Maintenance

Unplug the heater before cleaning and let it cool. Use a soft cloth to remove dirt.

Heating Element Replacement

Heating element replacement requires a certified service agent if malfunctions occur.

Installation and Mounting

Installation Precautions

Requires qualified electrician, proper grounding, horizontal mounting, and clearance from flammables.

Wall Mounting Instructions

Guide for wall mounting, ensuring correct cable placement, socket reach, and waterproofing.

This document is a user manual and safety instructions for the Heat Storm® Tradesman Outdoor Heater, model HS-1500-TRC.

Function Description:

The Heat Storm® Tradesman Outdoor Heater is a 1500-watt carbon fiber infrared element heater designed for both indoor and outdoor use. Its primary function is to provide heat using infrared technology. The heater is encased in a roll cage, suggesting a robust design suitable for various environments, including outdoor settings. It is intended to be mounted, with specific height requirements for different markets (US and Canada).

Important Technical Specifications:

Model: HS-1500-TRC
Power: 1500 Watts
Heating Element: Carbon Fiber Infrared
Protection Rating: IPX4 (suitable for indoor and outdoor use, indicating protection against splashing water from any direction)
Mounting Height (US Market): Not less than 72 inches (1.8m) from the floor.
Mounting Height (Canada Market): Not less than 98 inches (2.4m) from the floor.
Minimum Clearance to Adjacent Combustibles:
- Top: 24 inches (0.6m)
- Sides: 18 inches (0.45m)
Extension Cord Requirements (if used): No.16 AWG minimum size, rated not less than 1500 watts.
Branch-Circuit Protection: Must be supplied by a branch-circuit fitted with one 20 amperes over current protection.

Usage Features:

Operation: The heater is turned on/off with a switch. Before plugging in, the switch should be in the off position. The power cord must be firmly plugged into a socket.
Mounting: The heater is designed for wall mounting and only the supplied brackets should be used. It must be installed horizontally.
Placement Restrictions:
- Do not use directly near a bathtub, shower, or swimming pool.
- Do not use in areas where petrol, paint, or other flammable substances are stored.
- Not intended for use in bathrooms, laundry areas, and similar indoor locations where it may fall into water.
- Must maintain minimum distances from combustible materials (furniture, pillows, bedding, papers, clothes, curtains) – at least 3 feet (0.9m) from the front and away from the sides.
- Do not direct the heater towards curtains, furniture, or other flammable objects.
- Do not block air intakes or exhaust.
- Do not use on soft surfaces like a bed where openings may become blocked.
Safety Guards: The heater is fitted with safety guards to prevent large objects from hitting the emitters. The heater should not be operated with the guard removed.
Power Cord Management:
- The power cable must be fully unwound before use.
- Ensure the power cable does not touch the reflector of the heater or hang into the heated area.
- Ensure the power cable can reach an indoor socket.
- Do not twist or bend the power cable.
- Do not run the cord under carpeting or cover it with throw rugs. Arrange the cord away from traffic areas to prevent tripping.
- To disconnect, turn controls off, then remove the plug from the outlet by gripping the plug, not pulling by the cable.
Unattended Operation: Do not use this heater in conjunction with a timer device or any other device that facilitates unattended switch-on.
Children and Invalids: Extreme caution is necessary when the heater is used by or near children or invalids, and whenever it is left operating and unattended. Children should be supervised to ensure they do not play with the appliance.

Maintenance Features:

Cleaning: Before cleaning, unplug the heater from the power supply and wait a few minutes for it to cool down. The heater contains few moving parts and requires little maintenance. For heavy dirt buildup, use a soft cloth to wipe it off.
Heating Element Replacement: If the heating element malfunctions and needs replacement, it should only be changed by a service agent.
General Service: Any required service other than filter maintenance should only be performed by an authorized service representative. Attempting other repairs by unauthorized personnel will void the warranty.
Damaged Cord/Plug: Do not operate the heater with a damaged cord or plug, or if it malfunctions, has been dropped, or damaged in any manner. Return it to an authorized service facility for examination and repair.
Repair Attempts: Do not attempt to repair or adjust any electrical or mechanical functions, as this may void the warranty.

Warranty and Returns:

Warranty: A 1-year limited warranty covers manufacturing and material defects from the date of purchase, provided the heater is installed and operated according to instructions. The warranty is non-transferable and applies to the original owner who purchased from an authorized supplier. It covers repair or replacement of defective parts, at the manufacturer's discretion. It does not cover installation, labor, transportation, or other related costs. The warranty is void if the heater is subjected to prolonged dampness/condensation, unauthorized alteration, willful abuse, accident, misuse, or if the original receipt of purchase is not available.
Return Policy (within 30 days): For purchases made directly from Energy Wise Solutions, a full refund is issued if the merchandise is received in new condition, packed in its original manufacturer's box with all original packaging material, and includes original manuals and accessories.
Exchange/Refund/Warranty Claim (after 30 days): The buyer is responsible for all shipping charges.
Customer Service: Contact 435-752-6611 for warranty service. Proof of purchase and a picture of the manufacturer sticker may be requested via email (cs@heatstorm.com). Repairs are prioritized; a new unit is only provided if the heater is not repairable.