Need help?Do you have a question about the Heatcraft LFA and is the answer not in the manual?
Details the unit's cabinet construction, including rust-free aluminum and louvered grille.
Explains coil features like sweat-type connections and corrugated fins for optimal heat transfer.
Describes the inner drain pan and its features, including low-wattage electric heaters.
Covers motor wiring, mounting, noise reduction, and types like PSC and EC motors.
Lists unit configurations and factory-installed components like TXV, solenoids, and thermostats.
Presents performance data including capacity and fan flow for 60 Hz models.
Provides performance data including capacity and fan flow for 50 Hz models.
Details electrical specifications for LFA Air Defrost models across different motor types.
Lists electrical specifications for LFAE Electric Defrost models, including defrost heaters.
Provides electrical specifications for LFAH Hot Gas Defrost models and drain pan heaters.
Provides detailed physical measurements (A-G) for all unit models in inches and millimeters.
Lists part numbers and descriptions for common replacement components.
Details specific part numbers for various motor types used in the units.
Shows inlet, suction, and hot gas connection sizes along with approximate net weights.
Specifies nozzle types and sizes for LFA Air Defrost models based on distributor type.
Lists nozzle specifications for LFAE Electric Defrost models by distributor type.
Details nozzle selection for LFAH Hot Gas Defrost models.
To Next Page
General