Heatcraft LFA - Table of Contents; Nomenclature

2

Nomenclature ��2

Features & Benefits ��3

Performance Data

All Defrost Types �� 4

Specifications

Air Defrost ��5

Electric Defrost ��5

Hot Gas Defrost ��5

Dimensional Data ��6

Replacement Parts by InterLink™ ��6

Physical Data ��7

Standard Nozzle Selection �� 7

Table of Contents

LFA 070 A E

Model Series Capacity Electrical Code Design Revision

LFA = Larkin Low Flow, air defrost # x 100 = BTUH A = 115/1/60

LFAE = Larkin Low Flow, electric defrost B = 208-230/1/60

LFAH = Larkin Low Flow, hot gas defrost AH = 115/1/60 (PSC)

BH = 208-230/1/60 (PSC)

MH = 460/1/60 (PSC)

AE = 115/1/60 (EC)

BE = 208-230/1/60 (EC)

Choose the most energy-efficient motor available for evaporators�

The EC motor is an energy efficient option on Larkin Low Flow Unit Coolers� Available

on all new equipment or as an easy-to-install, drop-in replacement aftermarket part from

InterLink™ Commercial Refrigeration Parts� Because they are a drop-in replacement

for existing shaded pole and PSC motors, installation is quick and easy� It’s a high

impact, quick payback solution for reducing costs and achieving green initiatives without

replacing the entire system�

EC motors by InterLink are up to 75% energy efficient - that’s a 51-59% increase over

shaded pole motors and a 30-35% increase over permanent-split capacitor (PSC)

motors� With all of this added efficiency, you can count on more energy savings and

lower operational costs while taking a step in the right direction toward conserving our

planet’s resources�

Nomenclature