Need help?Do you have a question about the Heathkit IT-12 and is the answer not in the manual?
Detailed explanation of the internal circuitry and components of the signal tracer.
Instructions and best practices for performing proper solder connections.
Steps for mounting components onto the front and rear panels of the tracer.
Instructions for mounting electronic components and tube sockets onto the chassis.
Detailed steps for connecting wires to components on the chassis.
Preparation steps for the 1629 eye tube and its mounting bracket.
Steps for preparing the probe and test leads for the signal tracer.
Final assembly of probe, leads, cabinet, and preliminary testing.
Procedure for tracing radio frequency signals through circuits using the tracer.
Steps for tracing audio signals in circuits and for checking audio components.
Using the tracer to locate noisy or intermittent components in circuits.
Utilizing the tracer as a level indicator for alignment and troubleshooting.
Information on how to order replacement parts and warranty claims.
How to get technical assistance for kit assembly or operation.
Details on sending the kit for repair or factory service.
To Next Page
General
