Need help?Do you have a question about the Heathkit SB-102 and is the answer not in the manual?
General| Input Impedance | 50 ohms |
|---|---|
| Frequency Range | 80, 40, 20, 15, 10 meters |
| Modes | USB, LSB, CW |
| Tuning | VFO |
| Power Input | 120 VAC |
| Receiver Sensitivity | 0.5 µV for 10 dB S+N/N |
| Selectivity | 2.4 kHz at -6 dB |
Details sensitivity, selectivity, power output, and spurious response for the receiver.
Covers power input, output, impedance, radiation, and modes for the transmitter.
Details on controls like tuning, band selection, mode, and gain adjustments.
Covers main tuning, driver preselector, final tuning, and calibration settings.
Guides for wiring power supplies like HP-13A and HP-23A.
Steps to follow before applying power and for basic functional checks.
Procedure for aligning the receiver section for optimal performance.
Steps for tuning and aligning the transmitter circuits.
Explains how to interpret the transceiver's meter for various functions.
Step-by-step procedure for initial setup and tuning of the transmitter.
Specific settings for CW, LSB, and USB modes.
How to configure and fine-tune the Voice Operated Transmit (VOX) system.
A guide to diagnosing and resolving common operational problems.
To Next Page
