Need help?Do you have a question about the Heathkit SB-201 and is the answer not in the manual?
General| Type | Linear Amplifier |
|---|---|
| Input Impedance | 50 Ohms |
| Output Impedance | 50 Ohms |
| Mode | SSB, CW |
| Tubes | 2 x 572B |
| Power Requirements | 120/240 VAC, 50/60 Hz |
| Dimensions | 7" H |
Detailed instructions for assembling the main circuit board, including component placement and soldering.
Steps for mounting components on the chassis and RF shield, and completing all wiring connections.
Procedures for initial testing to verify functionality and check critical parameters before full operation.
Guidelines for placement, power source connection, exciter, and antenna setup.
Instructions for tuning, operating the amplifier, and interpreting meter functions and readings.
Common troubleshooting steps and solutions for issues encountered during assembly or operation.
Detailed explanation of the amplifier's electrical circuits, including power supply, input, output, and control systems.
To Next Page
