Need help?Do you have a question about the Heathkit SB-200 and is the answer not in the manual?
Detailed instructions for assembling the main circuit board.
Instructions for mounting various components onto the main chassis.
Steps for mounting components onto the RF shield assembly.
Step-by-step guide for setting controls and operating the amplifier.
Detailed instructions for assembling the main circuit board.
Instructions for mounting various components onto the main chassis.
Steps for mounting components onto the RF shield assembly.
Step-by-step guide for setting controls and operating the amplifier.
General| Type | Linear Amplifier |
|---|---|
| Tubes | 2 x 572B |
| Cooling | Forced air |
| Input Impedance | 50 ohms |
| Output Impedance | 50 ohms |
| Power Supply | 120/240 VAC |
| Power Output | 1200 watts PEP input |
To Next Page
