EasyManua.ls Logo

Heatmaster TC series User Manual

Heatmaster TC series
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EN • 1
ENGLISHFRANCAISNEDERLANDSESPAÑOLITALIANODEUTSCH
664Y2800.B
Installation, Operating and
Servicing Instructions
Question and Answer IconNeed help?

Do you have a question about the Heatmaster TC series and is the answer not in the manual?

Heatmaster TC series Specifications

General IconGeneral
BrandHeatmaster
ModelTC series
CategoryWater Heater
LanguageEnglish

Summary

Safety Warnings and Precautions

Emergency Procedure for Gas Leaks

Emergency procedure for gas leaks.

General Safety and Component Warnings

Covers parts replacement, burner presets, specific regulations, and safety during work.

HeatMaster TC Specifications Overview

Integrated Frost Protection

Explains the integrated frost protection mechanism.

User Guide and Operation

Adjusting Operating Parameters

How to adjust domestic hot water and central heating temperatures.

Fault Code Identification and Reset

Describes error codes and how to reset the appliance.

Electrical Connection and Wiring

Electrical Wiring Diagram

Diagram showing electrical connections and component labels.

Installation: Chimney Connection

Installation: Gas and Water Connections

Gas Inlet Connection Guide

Instructions for connecting the gas supply.

DHW System Connection

Guidance on connecting the domestic hot water system.

Installation: Heating System Connections

Commissioning and Maintenance Procedures

Initial System Commissioning Guide

Step-by-step guide for initial setup and checks.

Routine Inspection and Maintenance

Recommendations for annual inspection and cleaning.

Parameter and Setting Verification

Verifying parameters and boiler settings.

Component Disassembly and Cleaning

Burner Disassembly and Reassembly

Procedure for removing and reassembling the burner.

Heat Exchanger Cleaning Procedure

Steps for cleaning the heat exchanger and related parts.

Electrode Removal and Inspection

Instructions for removing and checking the electrode.

MCBA Specialist Parameters: Overview

Burner Blockage Error Code List

Lists error codes related to burner blockage.

MCBA Parameter Setting Guide

Setting MCBA Boiler Parameters

Guide to accessing and modifying boiler parameters.

MCBA Restricted Parameters

MCBA Safety Stop Error Modes

Safety Stop Error Code Troubleshooting

Lists error codes, descriptions, and resolutions for safety stops.

Related product manuals